If you have an iPhone 4 unlocked with Gevey SIM running iOS 4.x.x and now want to update to iOS 5 with Gevey Unlock, this guide is for you. You can unlock iPhone 4 iOS 5 with Gevey SIM by following the instructions below which tells you how to preserve iPhone 4 baseband while updating to iOS 5, jailbreak and then unlock with Gevey SIM.
What is Gevey SIM Interposer?
Gevey Sim is an unlock solution for iPhone 4 with baseband 01.59.00, 02.10.04, 03.10.01, and 04.10.01 on iOS 4.x.x, and iOS 5.0. Unlike UltraSn0w, Gevey SIM is a hardware solution, a SIM interposer sits between the SIM card and the Modem to perform a classical MITM. Gevey SIM interposer should always stay in-between SIM card and the iPhone modem in order to stay unlocked.
If you’ve an UltraSn0w unlockable baseband 01.59.00, you’re recommended to navigate to this guide:
How to: Unlock iPhone 4 iOS 5 with UltraSn0w
Since Gevey SIM unlock depends on preserved iOS 4.x.x baseband, you’ll need to use RedSn0w’s “Custom IPSW” feature
Downloads
- Download iOS 5
- Download RedSn0w 0.9.9b5 (Mac OS X) (Windows-comming soon)
- Download iTunes 10.5
Let’s Unlock iPhone 4 iOS 5 with gevey Ultra SIM
Unlock iPhone 4 iOS 5 with Gevey SIM
Step 1 – Preserve iPhone 4 Baseband
If your iPhone 4 is running iOS 4.x.x and has any of these basebands: 01.59.00 / 02.10.00 / 03.10.1 / 04.10.1, make sure you update to iOS 5 using a custom firmware with preserved baseband in order to unlock with Gevey SIM.
Follow this guide to preserve iPhone 4 baseband while updating to iOS 5:
How to: Preserve iPhone 4 baseband
Step 2 – Jailbreak iOS 5
Now you need to jailbreak you iPhone 5 running iOS 5 with preserved baseband. To jailbreak iOS 5, follow this guide:
How to: Jailbreak iOS 5 iPhone 4 with RedSn0w
Step 3 – Unlock with Gevey SIM
After the jailbreak, your iPhone 4 should be activated. Setup the iPhone 4. Now:
- Go to: Settings > General > Network and Turn OFF the 3G
- Turn Off the iPhone
- Eject and reinsert the SIM card along with Gevey SIM and turn the iPhone ON
- When turned ON, The iPhone will begin Searching… for the network
- After Searching for a few seconds, following popup should appear, hit the Accept button
- Now wait for 15 seconds;
- Then dial 112 and hang up after 2 seconds. The call does Not need to connect;
- Go to Setting app and Turn the Airplane Mode ON.
- After a few seconds, “No SIM Card Installed” message should appear, hit the OK button;
- Now turn OFF the Airplane mode; two popups should appear; the later one with “Invalid SIM Card” message. Don’t do anything and wait till the message disappears;
- As soon as the message disappears, iPhone should show the signal bars at the top-left.
That’s it! If the process fails, reboot, reinsert SIM and retry. Enjoy your unlocked iPhone 4 on iOS 5 with gevey SIM.
*** Remember that, on every reboot, you’ll have to repeat the GEVEY SIM process (Step 3) to get the signals back.
You can follow us on Twitter, Google Buzz, Facebook, and Subscribe to RSS Feed to receive latest updates.
really helping tips you’ve to sharing. thanks
I just updated to iOS 5 my iphone 4 BB 04.10.01
It went alright, Gevey Sim unlock still working… However, i can´t use the data network of my phone. It means that I can only use Wi-fi.
Did this happend to anyone here? Does anyone know the solution?
And my phone does not recognize the contacts anymore
Which gevey r u using because I have a ultra and it doesn’t work
I’m using an Ultra as well… A managed to make everything work now.
Internet gave me a little bit more trouble, but it’s working perfectly now.
I know it’s a dumb thing to say, nut try googling your problem, and i’m sure you’ll find the answers.
If the unlock is not working, do the procedure again… It take a few tries to make it work fine (turning the phone off and on, calling 112 and etc…)
just enable data roaming and you`ll be fine
Joao Pedro Joao Pedro :
is it unthethered jail break ?
Turn on roaming service. That will do..
how can i Preserve iPhone 4 Baseband on windows?
They said at the top that the windows version was on the way soon. This is teathered unlock
I upgraded my iphone 4 to OS 5 without preserving the iphone 4 baseband. i now have problems with activating my iphone with the Gevey sim. Any tips of how to activate the iphone or how to downgrade it to the previous os (4.3.5)
Thank you
ouch.. theres no way yet… your stuck… gevey isnt compatible with ios5… and you cant downgrade if u havent preserved…
Any options help please. I need to restore my phone.
You can downgrade to stock iOS 4.3.5 by doing an option restore and selecting 4.3.5 firmware, apple is still signing this firmware so your baseband will downgrade also, then follow the instructions to update to iOS 5 while preserving this baseband!
Yes I did the same and got it to downgrade back to 4.3.3 so it did work. I just had to run the jailbreak for 4.3.3 again to get it to come up.
Hi djvolak,
I couldnt downgrade to either 4.3.3 or 4.3.5. I keep geting the following message: Unknown error occured (3194
Can you please advise how your solved this.
Thanks
and my gevey sim(supreme)just worked well without doing anything(i mean turning flight mode on off/dialing 112….but it does show only one signal bar… otherwise everything is working well..
because newery GEvey SIM performs these steps by itself 🙂
Hello,
I updated my i4 (BB 2.10) to iOS5 but I am not getting Gevey Sim pop message where I need to “accept.” I did not do Jailbreak by the way. Just cooked custom IPSW with redsnow (beta 6) Does anyone know why I am not getting pop message? Thank you in advance
I jailbroke it also and It did not work. I assume that Gevey Sim Ultra is not working with iOS5. Maybe I am wrong but I tried everything to make it work. So if anyone knows what I am doing wrong please please let me know.. Thank you.
You need to cut all of te plastic off of your sim card so you only have the metal remaining, then use scotch tape to hold it in the correct place on your gevey chip!
I just updated mine to iOS5 as well. I could not get the message to pop up at all. What I had to do was install “SemiTether” and reboot my phone in the semi-tether state. The Gevey pop up shows and I did the 112 process. After you get a signal, power down like normal and “just boot” with redsn0w. Worked for me at least.
Hi all,
How can I check which Gevey I have?
snowbreeze upgrades iphone 4 bb 4.10.01 to iOS 5 without change in bb with gevey sim
great
Hi,
I did what was mentioned but the iPhone doesn’t boot without redsn0w help, apple sign hangs for a while and then a wheel shows (frozen) and nothing happens.
Any idea why is that?
does gevey sim works with iphone 3gs ios 5 and baseband 6.15.00
hey. my iphone 4 update with new IOS and Baseband update to 04.11.08 HELP…. PLEASE
04.11.08 unlock ??
What if i have 4.11.08 ?????
There is no unlock for 4.11.08. Not even with Gevey currently.
Gevey only works with iPhone 4 currently. If you have a 3GS on 6.15.00 you can simply install ultrasn0w for unlock.
my iphone is upgrade to 04.11.08 . . is there any other way i can downgrade it? or use it with a gevey? 🙁 right now i cant you it…
Hola yo tengo un iphone 4 lo estaba utilizando con gevey , lo tenia en la vercion 4.3.3 y lo actualize al ios 5.0.1 mediante itunes sin guardar la baseban y se me bloqueo y ahora no me sirve para nada ¡¡ porfavor AYUDAAA¡¡…… hay alguna manera de regresar a la vercion anterior , o hay o saldra alguna gevey compatible con el ios 5 ,,,, o ya murio mi iphone …GRACIAS
Hello there,
Today I had upgraded my Iphone into ISO 5.0.1 after that I had Jailbreak.
All process done perfectly and Its now in normal condition but No service showing upper left corner.I tried to resolve that according many you tube videos but it still shows no signal .I do please Help me
I am waiting.
Regards
iPhone 4, iOS 5.0.1, Modem Firmware 04.11.08
will it signals will come back with gevey sim
plz some one help me,,that how can i get back my phone signals thanxxxx
Anyone please I need to unlock my Iphone4, I updated to this:
iPhone 4, iOS 5.0.1, Modem Firmware 04.11.08
Anyone please? Help.
Hi everyone,
I’ve an Iphone4 with 4.1 IOS and 02.10.04 bb. I’m planning to unlock it with gevey as I’ve waited a lot for the soft unlock.
I’d like to upgrade to IOS 5 but I want to know which one to do 1st?
Unlock or upgrade.
If upgrade should I need to upgrade via Itunes or any other way to make it easier for the unlock?
Pls help me!!!!!!
Pls do reply guys. I need your help.. Iphoneheat pls help me!!!!!!!!!!!!!!!!!!
don’t expect a software unlock anytime soon..
Gevey is the only solution to date to unlock the said baseband..
If you want to update to iOS 5.0.1, use a custom firmware.. RedSn0w can create one for you..
Create custom firmware with RedSn0w: http://www.iphoneheat.com/2011/12/create-custom-firmware-redsn0w/
RedSn0w CFW just preserves your baseband. You need to jailbreak later with RedSn0w..
Golder Unlocking RULE: Avoid Stock Firmware
Hi,
i want to upgrade my iphone4 with ios5, i have 4.3.3 with 04.10.01 bb i unlocked with gevey sim
is it safe to upgrade my phone to io5 ????
thanks…
is unthethered jail break is available for this ios5 ??
I’m on Iphone 4 iOS 5.0 jb with gevey sim., but cant’ tell which gevey i have., I notice that my iphone would crash and restart time to time.? or would lost signals and i would have to restart the phone and do 112 to get back my service.
Anyone else have this issues?
I have my iphone 4 IOS 5.1.1 and bb 04.12.01. Which method can i use to unlock it?
i am on ios 5.0.1 and my gevey used to work, i sam activated. now i’ve deleted my sam activation and gevey works until after i turn off airplane mode (no sim installed comes up) then sim failure etc but it wont search for signals and stays at invalid sim. any help, please?
HI,
I used gevey on my iPhone 4-version 4.2.1(8C148) firmware 03.10.01, can i upgrading from
iOS-4.2.1 to5 without any problem through this gevey i have?
can you help me!
Hi,
you can upgrade to 4.3.3 without any ploblem. Before my iphone 4 was 4.2.1 now i upgraded to 4.3.3 it is working well.