Jailbreak iPhone 4, 3GS 4.3.3 with RedSn0w 0.9.6rc14 [How to Guide] - iPhoneHeat

Jailbreak iPhone 4, 3GS 4.3.3 with RedSn0w 0.9.6rc14 [How to Guide]

Redsn0w 0.9.6rc14 can jailbreak iPhone 4, 3GS 4.3.3 firmware. You can jailbreak iPhone 4, and iPhone 3GS 4.3.3 using RedSn0w. However, for now, RedSn0w provides a tethered 4.3.3 jailbreak solution. No iPad 2 support.

WARNING: If you depend on UltraSn0w unlock, you must STAY AWAY from RedSn0w and stock iOS 4.3.3, use Sn0wbreeze or PwnageTool instead.

How to Jailbreak iPhone 4, 3GS 4.3.3 with RedSn0w

Step 1

Download the required stuff:

Step 2

Restore iOS 4.3.3 on your iPhone, iPad or iPod Touch and keep it connected to your computer via USB.
*You can skip this step if you’re already running iOS 4.3.3.

Step 3

Execute the Redsn0w 0.9.6 rc14

Step 4

Hit the Browse button and select official iOS 4.3.2 firmware (downloaded in Step 1) NOT 4.3.3. RedSn0w will recognize your 4.3.2 IPSW file. Then hit Next.

Step 5

Now check mark “Install Cydia” and hit Next.

Step 6

Now make sure your iPhone, iPad or iPod Touch is turned OFF and Plugged in to your computer. Hit Next.

Step 7

Now you’ll be instructed to put your iDevice into DFU Mode. Follow the on screen instructions.

Once you’ve successfully entered into DFU mode, RedSn0w will start jailbreaking iPhone 4 or iPhone 3GS on iOS 4.3.3 tethered. When done! your iPhone 4, iPhone 3GS will be jailbroken tethered on iOS 4.3.3.

Jailbreak iOS 4.3.3

How to: Jailbreak iOS 4.3.3
How to: Jailbreak iPad 2 4.3.3 with JailbreakMe 3.0
How to: Jailbreak iPhone 4, 3GS 4.3.3 with Jailbreakme 3.0
How to: Jailbreak iPod Touch 4G, 3G with JailbreakMe 3.0
How to: Jailbreak Verizon iPhone 4 iOS 4.2.8 with Sn0wBreeze 2.7.1
How to: Jailbreak iOS 4.3.3 on iPhone 4, 3GS, iPad, iPod Touch with PwnageTool 4.3.3
How to: Jailbreak iPhone iOS 4.3.3 with RedSn0w 0.9.6RC15
How to: How to Jailbreak iOS 4.3.3 with Sn0wbreeze 2.7

You can follow us on Twitter, Google Buzz, Facebook, and Subscribed to RSS Feed to receive latest updates.

Also checkout:

Downgrade iOS 4.3.3

26 comments… add one
james96363 May 5, 2011, 8:03 am

If I use pnwage tool ist still tethered jailbreak?

kitzai May 5, 2011, 2:07 pm

thanks alot…..keep going!

kememmorrison May 5, 2011, 9:37 pm

what’s the improvement from 4.3.2?

thanks alot

bodmanknight May 6, 2011, 2:20 am

The biggest difference as far as I can work out is that the database which manages your location and so on and so forth, will be reduced in size… and they have patched the exploit used in 4.3.2 😉

hamiexz May 6, 2011, 9:22 am

peoples area wiating for the higher baseband unlock. but everytime we hear jailbreak jailbreak.

Fredy22 May 6, 2011, 9:56 am

I got gevey sim don’t need unlock :))

nowplace May 6, 2011, 1:17 pm

my itouch hang at the uploading ramdisk. Help plz.

pikabum May 7, 2011, 3:58 pm

Hi,

My iphone 3gs does not work with any sim now… it just says “no signal”

Can anyone help me?

Thanks

Mikey May 9, 2011, 8:30 pm

My iPhone 3GS doesn’t go further then the uploading ramdisk, then my iPhone turns on

Phillip May 17, 2011, 2:36 am

So i keep trying to jailbreak my iphone and i have restored it and whatnot but it wont let me access the firmware, i found the firmare and all on my computer, but it keeps saying “Unable to recognize firmware ISPW” or whatever the hell it says….it is ticking me off..please help.

Berni May 19, 2011, 2:36 am

i have updated my iphone on 4.3.3, and jailbrake it step by step as you explained on this page , and i can see cydia icon on it , but when i push it , it just run the cydia for a second , and then close it… i tried to restore and do it again , but i have the same problem , cydia start, and few miliseconds later go down… what to do now?? can you help me??? it was jailbraken on 4.3.2. iOS, and it works great , untill now , when i tried to do the same with 4.3.3…. :\

vivazm May 24, 2011, 5:20 pm

run redsn0w_win_0.9.6rc16 and yo white cydia icon will be gone.there yu are fully untethered.

MoonArrow May 25, 2011, 4:31 am

Sorry but I have the same problem than Berni (3GS old bootrom, jalbreak with rc16) and the iPhone is jailbreaked (cydia white icon present) but when I run it : crash.

I tried the proposed solution: run again the rc16 with the ‘Just boot tethered’ option and still the pb. I tried to start again from begining (update to 4.3.3, jailbreak again…) and still the same situation.

Has anyone a clue for me?

Thanks in advance

shady rashed June 10, 2011, 4:50 am

i had the same problem with 4g then i tried the rc17 it works very good cydia icon came back to the original one

dummy June 2, 2011, 10:38 am

Thanks alot. it works like a charm.

eugenewyh June 10, 2011, 11:38 pm

i jailbreak from ios 4.2.1 directly to 4.3.3 but now everything is done just no signal om the networking. Can anyone help me? I’m pissed off on this for the whole day

Incredenzel June 15, 2011, 11:38 am

THANK YOU!

anon6944 June 29, 2011, 8:35 am

I cannot seem to get this to work on my friend’s iPhone 3GS running 4.3.3, it worked on my iPhone 4 perfectly… but on his 3GS it will not install cydia or anything.

CaelanT July 5, 2011, 11:07 pm

Worked without any problems for me!

Thanks!

Mykhaylo July 6, 2011, 3:02 am

I have got a problem, when I install skype it’s not running, other apps I guess ok, I have done jailbrake like 5 times and still nothing ((( Thx a lot in advance!!!!

Akbar August 11, 2011, 1:53 pm

Hello, I need help, I jailbroke my iPhone 3gs 4.3.3, it was successfully finished. but iTunes ask me do you want update 4.3.5 then I pressed update, after that it was locked, I tried to jailbreak again, but I use iphone2.1_4.3.4 ???? restore.ipsw, after that my iphone shows me in the black screen white apple sign, so what I’ll do?

aliali September 25, 2011, 7:52 pm

Hi. I have a factory locked 3Gs which was jailbroken and unlocked. I accidently restored my iphone to factory setting.

Now its asking me to put in the original carrier SIM to activate it. I do not have that sim. Please advise how I can use my phone again. ?? how to start the jailbreak process and unlock again. thanks

Akbar September 28, 2011, 12:24 pm

Hi, How I can fix my Iphone 3gs, it shows only apple sign on the screen after I did jailbreak it, I used the Redsn0w(I don’t remember which version) firmware 4.3.4, because mine is 4.3.5
help me what shell I do?

Hans June 1, 2012, 3:05 am

Hallo

i have an iphone 3gs with 4.3.3 do i have to downgrade to 4.3.2 first to jailbreake it?

Leave a Comment