Jailbreak iPhone 3GS / 4 4.3.2 iOS with RedSn0w 0.9.6rc12 [How-to Guide] - iPhoneHeat

Jailbreak iPhone 3GS / 4 4.3.2 iOS with RedSn0w 0.9.6rc12 [How-to Guide]

These are the steps to jailbreak iPhone 4, iPhone 3GS on 4.3.2 iOS tethered using RedSn0w 0.9.6rc12. RedSn0w 0.9.6 can jailbreak iOS 4.3.2 / 4.3.1 on iPhone 4, 3GS, iPod Touch 4G, 3G and iPad. Step-by-step jailbreak instructions after the jump…

Important

  • If you depend on UltraSn0w unlock, STAY AWAY from iOS 4.3.2 and RedSn0w.
  • UltraSn0w unlockers, wait for the PwnageTool/Sn0wbreeze update
  • Your iPhone 4, iPhone 3GS must be running iOS 4.3.2 in order to use RedSn0w jailbreak.

Disclaimer: This guide is for educational and information purposes only. Follow the steps below at your own risk. We cannot be held responsible if anything goes wrong.

Let’s tether jailbreak iPhone 3GS and iPhone 4 iOS 4.3.2 with RedSn0w 0.9.6rc12.

How to Jailbreak iPhone 3GS, 4 iOS 4.3.2 tethered with RedSn0w 0.9.6rc

Step 1

Download the required stuff:

Step 2

Restore iOS 4.3.2 on your iPhone 4/iPhone 3GS and keep it connect to your computer via USB.
*You can skip this step if you’re already running iOS 4.3.2

Step 3

Execute the Redsn0w 0.9.6 rc12

jailbreak iphone 3gs 4 4.3.2 ios redsn0w 0.9.6rc12 (9)

Step 4

Hit the Browse button and select official iOS 4.3.1 firmware (downloaded in Step 1), Yes, 4.3.1 NOT 4.3.2. RedSn0w will recognize your IPSW file. Then hit Next.

jailbreak iphone 3gs 4 4.3.2 ios redsn0w 0.9.6rc12 (8)jailbreak iphone 3gs 4 4.3.2 ios redsn0w 0.9.6rc12 (7)

Step 5

Now check mark “Install Cydia” and hit Next.
jailbreak iphone 3gs 4 4.3.2 ios redsn0w 0.9.6rc12 (6)jailbreak iphone 3gs 4 4.3.2 ios redsn0w 0.9.6rc12 (5)

Step 6

Now make sure your iPhone 4, iPhone 3GS is turned OFF and Plugged in to your computer. Hit Next.

jailbreak iphone 3gs 4 4.3.2 ios redsn0w 0.9.6rc12 (4)

Step 7

Now you’ll be instructed to put your iDevice into DFU Mode. Follow the on screen instructions.

jailbreak iphone 3gs 4 4.3.2 ios redsn0w 0.9.6rc12 (3)jailbreak iphone 3gs 4 4.3.2 ios redsn0w 0.9.6rc12 (2)jailbreak iphone 3gs 4 4.3.2 ios redsn0w 0.9.6rc12 (1)

Once you’ve successfully entered into DFU mode, RedSn0w will start jailbreaking iPhone 4 or iPhone 3GS on iOS 4.3.2 tethered. When done! your iPhone 4, iPhone 3GS will be jailbroken tethered on iOS 4.3.2.

Tether boot iPhone/iPod Touch/iPad

Since it’s a tether jailbreak, in order to boot your device you’ll need to tethered boot it with RedSn0w.

  1. Simply open RedSn0w 0.9.6rc12, browse and select iOS 4.3.1, hit next, and select “Just Tether Boot Right Now” and hit next.
  2. You’ll be instructed to put iDevice into DFU Mode.
  3. This should boot the device.

You can follow us on Twitter, Join us at Facebook, and also Subscribed to RSS Feed to receive latest updates.

12 comments… add one
milton April 16, 2011, 1:48 am

eso de estar conectando el movil al pc para poderlo arrancar es un rollo y si me quedo sin bateria y no tengo mi pc quedo jodido por favor sacar algo mas productivo.

ToZ April 17, 2011, 4:08 pm

i ve jailbroken my iphone 4 16gb but the cydia icon was white and it couldnt start up …. i restarted my idevice … no changes pls help

syawai April 18, 2011, 5:36 am

that’s mean you need to boot tethered your device with redsnow, check/mark the “just boot tethered right now” then it will do all the rest by it self

chicco April 29, 2011, 5:05 am

Jailbreakme.com in ur iphone

Leave a Comment