The latest iPhone OS 3.1.3 firmware Breaks the jailbreak on iPod Touch done using any jailbreak tool like RedSn0w, BlackRa1n, PwnageTool. Fortunately using the latest RedSn0w 0.9.4 you can still jailbreak iPod touch 3.1.3 firmware with a tricky step.
iPhone users please navigate to:
Using RedSn0w 0.9.4, you can
Jailbreak iPod Touch 2G (older Non-MC models only)
and using RedSn0w 0.9.3 you can
Jailbreak iPhone Touch 1G
ATTENTION: Don’t go near this if you have 3GS, newer iPod Touch 2G, or any iPod Touch 3G. usual warning applies: Try it at your own we can not be held responsible if anything goes wrong.
now that if you have iPod Touch 2G (Non MC) or iPod Touch 1G and want to jailbreak 3.1.3 firmware, simply follow the step by step instructions below.
Jailbreak iPod Touch OS 3.1.3 Firmware
Step 1
- Download iTunes 9.0.3 and install it.
- For iPod Touch 1G
- For iPod Touch 2G (Non MC model)
- Download iPod Touch Firmware 3.1.2 (Yes, OS 3.1.2)
Step 2
Connect your iPod touch to your computer and run iTunes. Update your iPod Touch to firmware 3.1.3.
Step 3
Once your iPod Touch is updates to OS 3.1.3, the iPod Touch is ready for jailbreak. Run the downloaded RedSn0w file.
Just make sure;
- RedSn0w 0.9.3 to jailbreak iPod Touch 1G
- RedSn0w 0.9.4 to jailbreak iPod Touch 2G (Non-MC)
Step 4
Hit the Browse button and provide it the downloaded firmware 3.1.2 file because RedSn0w 0.9.4 or 0.9.3 will not recognize iPhone OS 3.1.3.
Step 5
RedSn0w will verify your firmware file. Once done, hit the Next button.
Step 7
On the next screen, check mark your desired options. For the purpose of this guide just choose Install Cydia and hit next. Select custom logos if you want them too. Hit Next.
Step 8
Read the on screen instructions to put your iPhone into DFU Mode.
Once you’ve entered into DFU Mode, RedSn0w will do its work and jailbreak your iPod Touch OS 3.1.3 and on successful completion, your iPod Touch will reboot.
You have successfully jailbreak iPod Touch 3.1.3.
We strongly recommend iPod Touch 3G, new iPod Touch 2G, iPhone 3GS and 3G user to stay away from iPhone OS 3.1.3 until unless iPhone Dev Team or GeoHotz come up with updated jailbreak and unlock tool. However, you can always jailbreak iPhone OS 3.1.2 using Custom Firmware, RedSn0w, PwnageTool, Sn0wBreeze, BlackRa1n and unlock iPhone OS 3.1.2 using UltraSn0w and BlackSn0w.
Disclaimer: Follow this guide on your own. I can’t be help responsible if ANYTHING goes wrong.
You can follow us to Twitter and Subscribed to RSS Feed to receive latest updates on jailbreak and unlocking stuff.
Update 1:
PwnageTool 3.1.5 is out now. You can follow the guide linked below to jailbreak iPhone 3.1.3, iPod Touch 3.1.3 using PwnageTool:
Update 2:
Sn0wbreeze v1.5 is out now. You can follow the guide linked below to jailbreak iPhone and iPod Touch using Sn0wbreeze:
- Jailbreak iPhone 3.1.3 firmware using Sn0wbreeze v1.5
- Jailbreak iPod Touch 3.1.3 firmware using Sn0wbreeze v1.5
Update 3:
- Jailbreak iPhone 3G iOS 4 with RedSn0w
- Jailbreak iPod Touch 2G iOS 4 with RedSn0w
- Jailbreak iPhone 4 [Coming Soon]
Dear iphoneheat
hi i just got ipod touch from my brother i don’t it’s 3g or 2g
how to know it?
http://support.apple.com/kb/HT1353
Dear Iphone Heat,
I have an Ipod Touch 2G (Non MC model) and I am on OS 2.2
I am not able to download the 3.0 OS or 3.1 OS through the link on this site and Apple is requesting for payment though itunes.
How to upgrade to at least 3.0 without having to pay for the OS?
Dear Billy, you torrent.
Either search Google or The Pirate Bay for the appropriate software/firmware.
Connect your iPod to iTunes.
When in iTunes, select/click your iPod.
Hold Shift.
Click Restore.
???
Firmware!!!!!
Then, Jailbreak.
You’re welcome.
my ipod touch 2g was upgraded to firmware 3.1.3 i try to jailbreak it using redsnow 0.9.4 but i dont know if it will work it’s still waiting for reboot
please help me tnx
to fix this all you have to do is when it says “waiting for reboot” hold power and home buttons untill it? starts loading everything…
After getting success please don’t forget to pray for mE .
Super cool.works f9 n good foe me.:)
THANK YOU SOO MUCH!!!!
Hi i have a non mc 2g ipod. It runs 3.1.3 and when in dfu redsn0w crashes. I have tried running as administrator and it appears to last longer. should I downgrade to 3.1.2 and just try it like that?
ko,mnbnvvvuo
i wanna jailbreak my ipod
Do u have 2 pay for thiz ?
nope
dear iphone heat,
i have an ipod touch 3G that runs OS 3.1.3….how do i jailbreak it….it says here that the updated snowbreeze can only jail break ipod touch 1g…
thanks…hoping for a reply from you
raye
no jailbreak solution for iTouch 3G 3.1.3 out there ATM.
http://www.spiritjb.com
Um,,, it’s damn good
I came from korean naver cafe,, ipod user booth
Anyway it’s fuckin good man
thanks
help please!!!
i have followed the instructions carefully. after the process my ipod is working nicely however when i tried syncing applications from my itunes it always says there’s an error.. i was able to transfer music the only prob is the application… mine is a 2g ipod touch model MB..
hope you can help me on this. i badly need some applications to be installed on my ipod..
why not rejailbreak 🙂
btw – if those apps are cracked then you need to patch mobileinstallation first.. guide can be found under iPhone guides category
el programa es bueno
hola soy edis me gustaria bajar este programa
dear iphone heat,
how fast is it supposed to reboot and do i have to still hold the home button after it starts jailbreaking
do i have to restore my ipod touch before running the jailbreak because if i restore i will lose my current apps and it is to much work to get it back. i have an ipod touch 2g non mc and 3.1.3 and i have everything needed for the jailbreak, but my only question is that can i jailbreak without restoring or i have to because i dont want to. and if its tethered how do i rebbot it if i accidently turn it off. do i have to restore because it doesnt say i have to in the tutorial. please reply and contact me at my email….. pleaseeeee!!! [email protected]
If you’re already @ 3.1.3 then there’s no need to..
I Tried But It Dosent Work!
this doesnt really have anything to do with the jailbreak, but whenever i open the file after i click the link it opens in notepad. I have a 2G iPod Touch model number starts with MB. Could anybody help me with this?
thank’s
What up?
Hi,
I am new with this stuff, but when I followed the process I have some doubts:
* After finishing with the redsn0w my Ipod touch 1g remains for a long time (around 10 min) like a brick, after this time the screen fully fade out and then I can do a reset, but nothing happens. I do not have the cydia icon.
Pleas help
please help me how do i know if my ipod touch 2g is a non MC version or is not a newer version.i want to jailbreak my ipod touch but as there is a warning i want to be sure i have the NON MC version before i go ahead
There’s no need to worry abt it anymore..
simply use Spirit jailbreak.. checkout the iPhone jailbreak guide.. and follow the iTouch 3G guide (same steps for all devices)
i have finished the jailbreaking with redsn0w 9.3 nd my ipod touch is still on a black screen with the blacklight on can any1 help thanks
try again.. if still out of luck then use Spirit jailbreak
I have red sn0w nd Sprint the red. Do reboot nd sprint says its missing dl file
Huh!? It didn’t work. I did exactly what you did with my Ipod Touch 3G 3.1.3. and it said it was done. Perfect, I thought, but when I checked it out, there was no change?
Please help me!!
Niels
Then try spirit jailbreak
how will i know if my ipod touch 3g is an mc model? and does this work for 3.1.3? thanks and appreciate it!
Use Spirit Jailbreak
i cant find the provided 3.1.2 firmware
A friend has an iphone 2g that is on OS 1.1.2, it’s AT&T
what is the best way to jailbreak/unlock? Does the OS need to be updates to 3.1.2 or 3.1.3?–then i know how to do it with blackrain—but I have seem the comments on redsnow 0.9.4 and spirit….advice?
go for RedSn0w with latest firmware..
for Spirit you must have home screen access on ur iPhone (Not Stuck at emergency calling screen)
During step 4, how do i “provide it the downloaded firmware 3.1.2”? How do i find the file??
checkout the iPhone Firmware category.. everything is there
I’m trying to jailbreak my iPod Touch 1G 3.1.3
It doesn’t recognize any of the firmware I provide. You have only iPHONE firmware 3.1.2, but I tried that firmware anyways. Didn’t work. I downloaded iPod Touch firmware 3.1.2 from some other site, and it won’t recognize it either.
What am I doing wrong? I’m using redsn0w 0.9.3 exactly as you said…
make sure the firmware is 3.1.2 because it can’t recognize OS 3.1.3
Yup, I’m totally positive about it. It’s iPod1,1_3.1.2_7D11_Restore.ipsw and I’ve downloaded many many maaany copies, just in case I had a corrupted file. It keeps saying “Unable to recognize IPSW”
This is my first jailbreak attempt, I have a iPod touch 2.2 (MB model) could someone tell me how to download iPod firmware 3.1.2.
hi!
just wondering….do you have a jailbreak program for firmwares 4.0, 4.1, and 4.2?
hi!
just wondering….do you have a jailbreak program for firmwares 4.0, 4.1, and 4.2? for ipod touch?
i did everything as instructed on this web page but ipod is completely out and says on the redsnow dialog box waiting to reboot,.,. what???????????? please help,,. ipod touch 1G 3.13 updated and i tried the 3.12 os download and then redsnow
Uhh.. Like, how many hours will it take for it to finish? 😐
cannot open my iPod Touch from DFU mode. :/
Hi,
In fact RedSnOw wait for an iPod reboot in Upgrade mode (keep on/off + Home, then release on/off).
Then the upgrade is going on after that…
How to know if my iTouch 2G is MC or non-MC? I tried this for 5 times or more. :-/ But redsn0w is just stuck in “Waiting for reboot.” Then, I retried again, and it didn’t work. 😐 Help, please. [-o< I keep trying it all over and over and over again. 8-|
Did somebody ever reply to you on what to do when unlocking iPhone 2G 3.1.3 with Redsn0w 0.9.4 got stuck on waiting for reebot? Been trying to look everywhere for the answer and I´ve only found people asking the same but never an aswer!!
Thanks for your help!
i jailbreak my ipod touch 1g 3.1.3
everything goes fine exept after i see the pineaple screen in my ipod
after that it reboot
and i see a shit laods of writting
and it says a couple of failure
and its not jailbreak cuz i cant install appz
used redsn0w 0.9.3
🙁
wtf
hey, i have a newer version of itunes.. will this affect in any way the jailbreak process?
my ipod touch (8gb) went into recovery mode .. itunes icon and wire shows on the screen. when i connected it says i must restore my ipod. i dont want to lose my music and videos. can you please help me. is there anyway i can save my music and videos from recovery mode >?
I’m attempting to jailbreak a 1G iPod touch running iOS 3.1.3. I using a custom built computer running Windows 7 Professional and iTunes 10.5.
The second stage of the jailbreak installs and then it gets stuck at “Waiting to reboot”. I must be getting into DFU mode correctly or I wouldn’t reach that stage. Is there something else interfering with the software? Do I need to try this in Windows XP compatibility mode?
Thanks for the help!
HI! Thanks Thanks Thanks Thanks!! THIS WORKED PERFECTLY FINE ON ME AND I’M NOW ENJOYING MY NEW JAILBROKEN iPOD!! <33333
I Jailbroken my iPod touch 1g, everything went ok, but when i try to sync apps it says an error occurred (0xE8008001) what should i do, I’ve also jailbreaked it again still not working
thank you it worked yeah!! BD
achei esse torrent http://tinyurl.com/85apmbr so consequi baixar por aqui a versão iPod1,1_3.1.3_7E18_Restore.ipsw ….
boa sorte;;;
thanks it works fine ^_^
Thanks… I have iPod 1g 8 GB. It got jailbreaked. The first time i have successfully done this. What should i do next? I mean how can i copy the apps and other stuff. Where will i get those?
Hi iphoneheart
i have an ipod touch 1st gen running iso 3.1.3
i m not able to upgrade it further but i want to play some games on it but most of them are not available for this iso version…what do i do?? & i want two update it also….plz help
dude i got 1st gen ipod touch with ios 3.1.3 how to jailbreak it ?
hello
i’m trying to jailbreak my iPod Touch 1G 3.1.3
It doesn’t recognize any of the firmware I provide. I downloaded iPod Touch firmware 3.1.2 (iPod1,1_3.1.2_7D11_Restore)
What am I doing wrong? I’m using redsn0w 0.9.3 exactly as you said…
Wow, same thing to me! I have the same gen, same firmware, same PROBLEM ! Please IphoneHeat, help us !
Just tried it myself.. IPSW recognized without any problem..
Use RedSn0w 0.9.3
and point it to iPod1,1_3.1.2_7D11_Restore.ipsw
Wont work, tried a billion times… Maybe because i have MA model.. iPhoneHeat? What do you say about it?
If RedSn0w is not recognizing 3.1.2 IPSW then may be it’s your 3.1.2 firmware. Re-download it from some other source and retry.
Hello, I’ve just bought an iPod model MA623ZK, running 3.1.3 IOS.With JAILBREAK I can install a recent IOS?
Thanks for your help