Jailbreak iPhone 4.3.2 with PwnageTool 4.3.2 [How-to Guide] - iPhoneHeat

Jailbreak iPhone 4.3.2 with PwnageTool 4.3.2 [How-to Guide]

PwnageTool 4.3.2 can jailbreak iPhone 4.3.2 untethered. These are the steps to jailbreak iPhone 4.3.2 with PwnageTool 4.3.2. PwnageTool 4.3.2 jailbreak steps are same for iPhone 4, iPhone 3GS, iPad and iPod Touch 4G, 3G.


PwnageTool will preserve iPhone 4 and iPhone 3GS baseband so that you can unlock with UltraSn0w later. Windows users can use Sn0wbreeze 2.6 to jailbreak iOS 4.3.2 untethered on iPhone 4, 3GS, iPad, iPod Touch 4G, 3G.

Jailbreak iPhone 4.3.2 with PwnageTool 4.3.2

Step 1

Step 2

Open the downloaded PwnageTool.dmg and copy the PwnageTool.app to your desktop and execute it from there;
Hit the OK button;
Now select Expert Mode from the top left side of the window;

and then select your iDevice. Hit the Next button.

Now hit the Browse for IPSW button and select iOS 4.3.2 firmware for your device (downloaded from Step 1);
On next screen, Select General and hit the Next arrow button;
iPhone users:

  • Select Activate the phone option if you’re on unofficial carrier.
  • Do NOT select Activate the phone option if you’re on official carrier e.g. AT&T.

Keep hitting Next button until you’re back to the same screen where you selected General.
Now Select the Build Option and Hit Next.

PwnageTool will prompt you to select a destination folder to save custom iOS 4.3.2;
PwnageTool will start building your Custom IPSW;
During the build process it’ll prompt you for your admin password.

Step 3

Once the custom IPSW has been built, PwnageTool 4.3.2 will ask you to connect your iDevice to your computer. Once your device is detected, you’ll be instructed to put your iDevice into DFU mode.

  • Press and hold the power + home buttons for 10 seconds.
  • Release the power button but continue holding the home button for 10 seconds.

Once the iPhone/iPod Touch/iPad is in DFU mode, the follow popup message will appear. iTunes will also pop-up.

Step 4

In iTunes, hold the Alt/Option key and hit Restore. From the popup window, browse to the Folder where you saved custom iOS 4.3.1 and select your custom .ipsw file that you just created and click Open Button. (Make sure you’re selecting custom firmware, Not stock one)

iTunes will now restore the firmware on your iPhone/iPad/iPod Touch. This can take up to 10 minutes.

When done, you have successfully Jailbreak iOS 4.3.2 firmware with PwnageTool 4.3.2.

You can follow us on Twitter, Google Buzz, Facebook, and Subscribed to RSS Feed to receive latest updates.

4 comments… add one
vicks88 April 25, 2011, 8:49 am

s

FatalError April 29, 2011, 6:23 am

Note: If you have trouble and lock up at “Updating Ramdisk”, right click on redsnow, and run in Windows XP mode next time.

Leave a Comment