As you would know by now that GeoHot’s BlackRa1n jailbreak in out now. So, In this guide you will learn how to jailbreak iPhone and iPod Touch on OS 3.1.2 using BlackRa1n for Windows.
NOTE
- BlackRa1n jailbreaks all iPhones and iPod Touch models
- BlackRa1n jailbreak will work with the latest 3.1.2 firmware.
- It will not hacktivate your iPhone. This means that if you are using an unlocked iPhone 3GS or 3G then stay away from it because BlackRa1n requires to update your iPhone to OS 3.1.2 resulting in updating your Baseband as well which means your iPhone will NOT activate on unofficial carrier.
- Use BlackRa1n only if you do NOT care about Unlock (You’re on official carrier).
- BlackRa1n also Jailbreaks iPod Touch 3G but it’s a tethered jailbreak. Which means whenever you would restart your Touch or it turns OFF because of empty battery then you will need to rerun BlackRa1n.
WARNING
iPhone 3GS and 3G users who have unlocked their iPhone must stay away from BlackRa1n otherwise their iPhone will locked because of Baseband update. Wait for the next PwnageTool update to safely update to OS 3.1.2. If you’re already on OS 3.1 or 3.1.2 without using PwnageTool then you can NOT unlock your iPhone atleast for now. In this case you can now use BlackRa1n to atleast jailbreak your iPhone.
and in the end, usual warning applies: Use it on your Own.
Jailbreak iPhone, iPod Touch using BlackRa1n
- Update your iTunes to latest version.
- Install the latest firmware in your iPod or iPhone. You can download iPhone OS 3.1.2 from here:
All iPhone Firmwares
Step 1
Go to: http://www.blackra1n.com and download BlackRa1n by clicking on the Windows icon at the bottom of the page and save it on your desktop.
Step 2
Now execute the BlackRa1n.exe from your desktop by double clicking on it.
Step 3
Now connect your iPhone or iPod to your PC and hit the make it Ra1n button.
Step 4
Now your iPhone will go into Recovery Mode.
Regular Recovery Mode screen will be replaced with picture of GeoHot.
After the BlackRa1n has done its stuff, your iPhone or iPod will Reboot.
Then a Popup will appear telling you that BlackRa1n is a free tool and if you like it you can donate at [email protected]
Step 5
Once your iPhone is back ON you will see a BlackRa1n named icon on your iPhone SpringBoard. Which means your iPhone or iPod has successfully been jailbroken.
Tap on the BlackRa1n icon on SpringBoard. (Make sure your iPhone/iPod have internet connection)
Step 6
Now choose your desired installer from the given choices and press the Install button at top-right.
BlackRa1n will download your selected package and then install it.
Step 7
Once all done your iPhone/iPod will respring and you will find your selected package icon on SpringBoard.
Step 8
Check if your installer package is working fine. Now you may remove BlackRa1n icon from your SpringBoard by uninstalling it.
That’s it. If you have any problem or any query, use the comment section.
NOw you can also checkout how to install cracked Apps on your iPhone/iPod.
Have Fun!
Some Work Outs to Get Rid of Errors
- If you are stuck at “running… ” When you perform the firmware update restart your iphone and then run BlackRA1n or try changing the USB port
- if you are using Windows 7 , run blackra1n in compatibility “Windows Vista SP2? and run it as administrator.
- Manually put the iPhone into DFU mode. Open the task manager and Kill the iPhone related processes like iTunes.exe, ipodservices.exe. Ren BlackRa1n. When picture appears, wait for 10 seconds then press and hold just the power button till you see the little working circle near the bottom of the screen. It takes some time to boot up first time.
If you’re still out of luck, you can try RedSnow:
“…Use BlackRa1n only if you do NOT care about Jailbreak (You’re on official carrier)…”
Don’t you mean UNLOCK here? Blackra1n is if you DO CARE about jailbreak…?! 😉
I am using Iphone 3GS with OS 3 which is unlocked, if i want to re jailbreak it due to junks, it will definately lock it.
Can i jailbreak and use ultrasn0w to un lock it.
Please reply
thx Misha for the correction
@ Rizwan
Sorry you can’t use UltraSn0w after BlackRA1n bcoz it will update your baseband and UltraSn0w doesn’t work with updated baseband
I’ve tried to use this software to jailbreak my phone but for some unknown reason my iPhone just stays on the screen where it wants me to sync with iTunes. It does not go any further than that screen and the BlackRa1n is stuck on Running status and does not go any further.
Thanks for reply
Hi iphone heat,
Please help me to show how to download blackra1n.exe from blackra1n.com. i can not find any link to download blackra1n.exe bottom of the page. please help me. thanks
click on the Windows logo at the bottom of BlackRa1n.com home page
It doesnot work on my 2g it reboot but not jail breaked. Crap !!!
i am using iphone 3GS OS 3.1 Factory unlock. Can I use blackrain to jailbreak my Iphone and do i need to worry about factory unlock? is it true that my phone still unlock after i jailbreak it with blackrain?
thank you for your response
my iphone 3g gets stuck on hook up to itunes logo when i press make it rain then its says its in recoverymode then it just stays on with that screen i need help asap thanks
what they forget to mention is u have to hold home button til u see the harrypotter looking guy come up[
the thing is that does black ra1n work on 3.1
I’ve tried to use this software to jailbreak my phone but my iPhone just stays on the screen where it wants me to sync with iTunes. It does not go any further than that screen and the BlackRa1n is stuck on Running status and does not go any further. Did you know whats happen??
check out the bottom of the post where I just posted some work outs to get rid of errors.
i did it allready install cydia, do all of that but when i try to unlock with ultralsn0w and i can’t unlock it still seaching all the time. I don’t know why please help me iphoneheat. thanks
The guide clearly says that it only jailbreaks ur iPhone and if you’re depending on UltraSn0w then never try BlackRa1n, use PwnageTool instead.
Sorry dear you’re out of luck for now.
is that any way to help me out of this. down grade or use something els. please help. thanks iphoneheat
I am sorry to tell you that there’s no unlock solution for updated baseband out there.. Enjoy your iPhone as an iPod Touch until there comes a tool for updated baseband or try turbo Sim Jacket for the time being..
I tried to jailbreak my 3g with blackra1n but after it goes to the recovery mode, the screen doesn’t change to the picture of guy. it turns black and it stucks over there. then i have to manually restart the phone and there’s no blackra1n icon in the phone after this.
please help me out. do i have to wait for longer like 30-40 minutes for the phone to restart? does it take that long or there is some issue??
In case anyone is having trouble with jailbreak crashing during recovery mode
Note: Your phone has crashed if blackra1n says its running and your iphone is showing needs connection to itunes
Follow these instructions below as you WILL see blackra1n photo
Alternative Method [VIA iSpazio]
1. Connect the iPhone to your computer, close iTunes and click on “Make It Rain” by blackra1n.
2. When the iPhone crashes in recovery mode, and blackra1n remains in “running”, do not close BLACKRA1N and turn off the phone by clicking on Home + Power.
3. The program will tell you that the operation of Jailbreak has been completed but in reality it is not. At this point, then:
Close Blackra1n;
Re-open Blackra1n;
Click on the button “Make it Rain
Turn on your phone
i have tried all the things u said but the screen is stuck at the itunes and cable symbol pls help me i tried all methods bu it dint work
@ Praveen Kumar
try this:
http://www.iphoneheat.com/2009/10/download-iphone-os-3-1-2-custom-firmware-ipsw-files-for-iphone-3gs-3g-2g/
well, mine doesn’t stuck in dfu mode, it changes to black screen and on blackra1n it says done wait for reboot. but what happens is that my phone never restarts, i have to manually turn it on and there is no blackrain icon in the phone. please help me out
do we have to hold the home button after clicking on makeitra1n till the picture of the guy show up on the screen??? is something missing in the guide?
it helps it just waste 5 mins for me,and it runs smooth,this my first time to jailbreak my own ipodtouch..thanks
help…. i tried to jailbreak my iphone 3gs which i juz bgt 2 days ago my phone juz went off when i was half way thru the jailbreak & i cant on my phone there after… wat can i do ???? desparately need help ……
Hold down the both home and power button for 10 sec then release the home button but keep pressing the Power button
hey i used the BlackRa1n but i have problem for my sim not unblock pls tell me how i am from lebanon
what’s you baseband now? 05.11 right!
It’s not unloackable.. wait for dev-team or GeoHot to release a solution for this ver. of Baseband
I have a iPhone 2g version 3.1 firmware 04.05.04 and this jailbroke it but didn’t unlock it for simcards..so how do I unlock it?
search through the blog
I used blackra1n to jailbreak my 3GS, 3.1.2. Now, every time I turn my phone off and back on I have to connect to itunes which says my phone is in recovery mode and I have to restore it. I can jailbreak again but when I install anything that requires phone reboot I have to restore. Any ideas?
Thanks!
It’s acting like a tethered jailbreak.. Don’t know why
hi guys… I have just jailbreak my iphon with blackra1n n installed cydia, worked like a charm… but all my apps n games don’t work. Once you click on an app it comes up for a millisec and gone! pls help
regards
Hi ,I jailbroke my locked 3gs phone but nothing is happening ,i see geohot photo after running blackra1n but when it restart nothing happens and it just go back to the emergency call 🙁 i tried that million times please help 🙁
Did you try after performing a fresh restore?
m using iphone 3gs 3.1.2 firmware officially unlockd can i use blackra 2 jailbreak ma iphone ll it get lockd if i do? plz help me out thnx
Give it a shot.. in case it get locked (it should not) then use BlackSn0w to unlock 🙂
thnx 4 reply
do v need wi fi connction during jailbrk???
its easy to unlock by blacksnow if it gets locked durng jailbreak???
thank yu
not during jailbreak.. but for unlocking wifi is required.
but to install cydia during jail break it asks internet connection?
thank you.
Ops.. for blackra1n it does
awsm buddy it workd yaar nice so simple no prob. nw hw can i download themes n good app via cydia
thnk you……….
hello buddy ven m startng vit jailbrk 4 ma iphone 3gs 3.1.2 by blackra1n ders no icon on d screen by vhich i can downlod cydia
helppp.
Try it after putting your iPhone in Recovery Mode
hmmm my iphone is 3gs os 3.1 05.11 base but i hang on the black screen after it says done and wait for reboot.. no pic of anyone too..
i dont have cydia in my phone also.. try very long still cant see the face …
You need to download it from within blackra1n
but i hang in black screen … phone wont reboot too.. i bought my phone from singtel in sg.. issit cant jailbreak?
Hold down both home and power button untill you get a itunes and cable on your screen (Recovery Mode)
then run the blackRa1n
sorry to trouble you.. i tried alot of times.. using your methods .. but the picture of the guy did not show up on the screen.. keep black screen .. waited till it auto reboot, but no blackra1n app show up.. issit bcuz my iphone is white colour instead of black? cux i see some threads ppl stating their iphone colour ..
ok.. tell me your model.. and PC OS
my iphone model MC132ZA Ver 3.1.2 (7D11) Fw 05.11.07 .. PC OS window XP
by model i mean 2G/3G/3GS ??..
ok here you go..
connect to cable..
iTunes detects your iPhone.. Now close iTunes
go to task manager and kill iTunes related processes/services (iPodService.exe, iTunesHelper.exe).. Also kill mdnsresponder
Copy blackra1n.exe to C drie root.. C:\blackra1n.exe
and execute..
come back with results
sigh.. model 3gs white.. result still same.. =(
Try it on another PC
thanks iphoneheat! can le.. i try it on another com.. i think my com cant do it lols.. thank you so much =)
🙂
There is definitely a problem with 3Gs phones and this jailbreak. My phone is not unlocked and I am running 3.2.1 on a factory at&t phone.
EVERY TIME you need to power off your phone and reboot, it says connect to iTunes. This can be a problem if you don’t have your computer with you 24-7
-Note: Instead of restoring through Itunes you can re-run Blackra1n to restart springboard.
Any solutions?
because new units are tethered jailbreak only..
wait for dev-team/GeoHot to come up with a solution
I have problem,I did not delete the blackra1n from the iphone.I wanted to reset the iphone by erasing all the data in the phone.After the iphone shut down and when it was booting back the screen froze at the little white apple screen.Its not moving forward.I tried pressing the home key and the on/off button for few seconds.It come back to the little white apple scree and freezes.What to do now.
holde down the both Home + Power button until iPhone reboot and turn back on with a connect to iTunes screen..
restore OS 3.1.2 and use blackra1n to jailbreak
Hi, tried downloading blackrain from the links provided, but when accessing the official website for the download, the windows icon on the page for the download is not working, can someone tell me an alternative site from where i can download. I have the latest ipod touch 8gb 3, firmware 3.1.2(7d11)
Thanks in advance
PS are the tutorials the same for jailbreaking the iphone and the itouch?
soorry for the noob questions
BlackRa1n:
http://www.iphoneheat.com/wp-content/uploads/2009/11/blackra1n.zip
This jailbreak guide is for all idevices to date.
i have problem that everytime i download winterboard and it has to reboot. and everytime i rebooted it , i got stuck at recovery mode and it says i have to restore the iphone. Anyone has solution to this one?
do NOT restore.. just run the BlackrA1N again
yeah i used blackra1n on my ipod touch but nothing happened.. the apps not there
Thank you very much it work . i have one question i don’t have wifi near my house, is there other way to install Cydia without wifi?
Does this work with MA model. People say it doesnt work with MC but it works with model MB. Will it work with MA
Except MC it should work for all
it happndz wi me thrice i can jailbrk ipod 3.1.2 new one 3g wch got voicememos,simple ques is what shud i do after jailbrkin coz after doin it ican install cydia rock n able to download paid games as free but once irestart my ipod for any reason it display me connect ipod wi itunes andonce i do it , it askd me to restor…e and same shit agn n agn(plz leameknow wht shud i do then ?plz help plz ( i wnt 2keep it jailbrk (( emailme at dkmissu@ yahoo.com or leave comments here ..Thanks
do NOT restore again… when it asks to restore simply run the blackra1n again…
it’s called tethered jailbreak… you need to run blackra1n each time you reboot your iDevice
that’s the only solution for now
I’ve a problem with my 3gs, after jailbreak and unlock the phone it works well … i can survive with jailbreak every time i reboot the device but there is something when i answer a call when i put the phone on my ear it should turn off the screen and when i move it away it should turn it on …. what is happening is the opposite
i should cover the top of the ear place to turn on the screen to do whatever end the call or check the contacts
what is that ?
something wrong in software program, or jailbreak error
my phone is 3Gs 16 GB , firmware 3.1.2,
hey
how do i remove the blackra1n jailbreak from my itouch 3.1.2? i want to jailbreak to snowbreese.how do i remove the hack ?? i couldnt find any info…
thnx for the help in advance 😀
simply create a custom firmware with Sn0wbreeze and restore your iTouch with that CFW..
Sn0wbreeze guide can be found under jailbreak iPhone category
thx iphoneheat!!! so u mean without restoring i can hack with the snowbreese…this jus made it better i don hav to lose any data dat way right? thnx alot man 😛 u saved me 😀
Sn0wbreeze creates custom firmware .. means restore is required
Hi heatwave, does jailbreak void the local warranty? Heard from my fren that if i restore my setting back to original, the warranty is still there. it is true? I am using model MC132ZA Ver 3.1.2 (7D11) Fw 05.11.07 too and PC vista bits 32. After jailbreak can i use my sim card? Thanks
If it’s 3GS, do NOT play with it for now…
@ warranty.. restore to default OS and you’re back to life
When I downloaded blackra1n at blackra1n.com it only download the read only file not the exe file.
i have followed the proceedure layed out using blackrain but when i click the “make it rain”button the image of geo hot does not appear and itunes just tells me it detects iphone in recovery mode the ask me to restore or update.if i restore it goes back to sim detected is unauthorized…dont know what to do.im desperate to learn this can somebody help me???
why not try a custom firmware or redsn0w
i”ve read a lot of tips and watched a lot of videos regarding jailbreaking,especially using blackrain,it looks just so simple,but i cant make it work..this guy,think he’s name is ty seems to know a lot about this.i just wish i could have like a few minutes of his time to help me out on this jam.